Midbrook, Inc. Building 12 New Washers for a Domestic Automobile Manufacturer with Plants in Mexico
Jackson, MI (PRWEB) December 24, 2007 -- Midbrook, Inc., of Jackson, Michigan, announced that it has been awarded a contract to build 12 new washers for a domestic based automotive company. These cleaning systems will be used as part of a new 6-speed transmission program. The equipment will be installed in a transmission plant located in Mexico.
Midbrook is the minority owned, world leading provider of process specific, high volume aqueous part cleaning systems, sealed solvent cleaning system, water bottling equipment, and medical cart washing equipment
The domestic automotive company chose Midbrook because of its capabilities of building and installing proven systems with proven technologies.
The parts washers being manufactured by Midbrook are required for five manufacturing areas. The areas are identified as follows:
1. Pinion gears - green.
2. Pinion gears - hard.
3. Sun gears - green.
4. Sun gears - hard.
5. Internal (ring) gears - green.
Midbrook will provide the design of the system to perform the cleaning process, build a machine to that design, debug all program related issues, runoff the equipment to the customer's satisfaction as well as provide integration support, on-site start-up and training of operating personnel.
These washers are designed to be small, single pass, side stream washers. These washers will be connected to a central filtration system that will maintain the clarity, temperature, flow, and pressure of the wash solution. The plant's central system will supply wash solution directly to the filter. The design flow rate will be 60 GPM maximum and 40 PSI minimum at the spray nozzles. The wash solution to be used is 3-5" concentration of Ferrocote 624 AAM. These washers are not required to have the capability of self-contained (stand-alone) operation.
The conveyor drive was designed for continuous flow through operation. For each specific part type, the washer is capable of washing all part numbers being manufactured with either no or minimal change-over adjustments required.
In regards to cleaning equipment, Midbrook does offer standard, in stock part washers, however their reputation has been built upon their ability to assess their client's production process and develop an integrated cleaning process designed to meet specific cleanliness levels within the floor space available.
The same can be said of the CapSnap water bottling equipment and Medical cart washers. Although standard systems are available, Midbrook's niche is to evaluate the client's individual application needs and design a system that will achieve the goals sought.
Midbrook is a minority owned provider of commercial metal parts washers, custom sheet metal fabrications, with high pressure metal parts washers for metal part degreasing and specialized water bottling systems.
###
Related Articles:
JellyBasket - Order Palmalito guava jelly by the case or gift basket!
Palmetto Canning Co., Inc. - Contract Packaging in glass or plastic for sauces, marinades, and other food products
CareMetix, Inc. - Contract Packaging for tube filling, form fill and seal, wet or dry chemical products including polyvinyl packaging.
How a Paint Manufacturer Significantly Reduced Their Product Loss -- a Real World Documented Case Study
Latex paints and stain manufacturer -- PPG Architectural Finishes of Louisville, Kentucky -- knew its filling operation was overly complicated, noisy, and required far too much operator attention. More importantly, PPG experienced an unacceptable percentage of product loss in the filtering process. PPG replaced their vibrating screen, accumulating vessel, and diaphragm pump with a Ronningen-Petter DCF-800 self-cleaning filter, greatly reducing product waste, operator involvement, and line noise levels.
Jewelry Findings Manufacturer Adds Dramatic Photos to Jewelry History Essays
Photographs of ancient and historical jewelry articles have been added to the Guyot Brothers website.
Why You Need China Manufacturer Data Base?
You've probably already noticed that many of the products we use today are manufactured in China. China is one of the best places to source your wholesale products from, mainly because of its low costs in labor and manufacturing. When you do business directly with China, these low costs carry over to become extra savings and profits for you.
Global Manufacturer Uses CareerTV Recruitment Videos To Give An Edge To Their Hiring Process
"It is a perfect way for us to push out our message in an appealing way to the millennium generation," says Maureen Crawford, Manager of Talent Acquisition at OSRAM SYLVANIA. As the recruitment market becomes more competitive, increasing numbers of employers are starting to brand themselves using video.
LegalView Reports on Details of FDA Warning to Avandia Manufacturer for Withholding Avandia Study Research
LegalView recently reported the FDA warning letter given to manufacturers of Avandia for withholding post-market research. GlaxoSmithKline failed to comply with FDA regulations and offer officials full details of 10 ongoing clinical trials.
Temtrol Selects BuyDesign Guided Selling and Configuration Software from TDCI -- Commercial/Industrial HVAC Manufacturer Set to Enhance Sales Processe
TDCI, Inc. announced today that Temtrol, a leading manufacturer of commercial and industrial Heating, Ventilation and Air Conditioning (HVAC) equipment, has licensed TDCI's BuyDesign® Channel Sales software to support and enhance sales processes for the company's highly tailorable line of air handling units, fan coil units, and OEM and replacement coils.
Alcohol Testing Equipment Manufacturer Lifeloc Technologies Announces Portable Breath Alcohol Tester Rental Program for Law Enforcement Agencies Needi
Cost-effective portable breath alcohol tester rental program is the perfect solution for peak demand times and special events.
Luxury Bedding Manufacturer United Feather & Down Announces Exclusive Partnership With X-STATIC - The Silver Fiber
Pinnacle Antimicrobial and Anti-Odor Silver Technology to be Incorporated Into Bedding Company's Products by 2008.
Window Book Announces Postage Statement Form Filler™: Easy and Cost-effective Solution for Generating Postage Statements
Window Book, Inc., has announced the launch of 'Postage Statement Form Filler', an easy and cost-effective mailing solution for quickly producing printed USPS Postage Statements.
Adobes Market, The Mexican Copper Sinks Manufacturer, Strives to Capture a Good Piece of The American Market With High Quality and Affordable Prices
The artistry and utility of copper sinks have made them a valuable addition to many american homes. And with high quality and affordable prices Adobes Market brings them closer to you.